Wires for General Purpose

Specification for Soft Annealed Wires in Coils

Wire Dia Range (mm) Coil diameter in inches CoilWt. (Kgs.) Surface Finish TotalHt Formers + Pallets Inches Total Wt. on Formers Kg.
ID OD Min Max
5.00-8.00 24-27 33.37 100 500 MATIE 60 1500
5.50-2.50 18·22 25·30 100 500 MATIE 60 1000
2.49-1.60 18·22 25·30 100 500 MATIE 60 1000
1.59·1.00 12·14 20·24 50 100 MATIE 60 500

Product Range

Stainless Steel Wires are used in Engineering, Chemical, Construction and many other industries besides various type of application in manufacturing of KITCHEN WARES, ORNAMENTS, UTENSilS. Stainless Steel Wires at KEI are manufactured as per INTERNATIONAL STANDARDS as well as in accordance with customer’s specifications.

 

Special Characteristics

  • Produced from Wire rods meeting International standards
  • Supplied in annealed, 1/8 hard, 1/4 hard & 1/2 hard, 3/4 hard, full hard conditions. – Drawn to very close tolerance limit.
  • Excellent Surface finish.
  • Quality Checked at each process stage.

Chemical Composition

  • Available in complete range of Stainless Steel as per AIS!. DIN,JIS and BS standards.

Mechanical Properties

Dia (mm) AISI 304, 316 AISI 304l.316l
Tensile Strength N/mm’ (Kgl/mm’) Elongation (%) Tensile Strength N/mm’ (Kgf/mm’) Elongation (%)
0.10 – 0.16 Manufactured in only low carbon grades 30 min 785 max (80 max) 30 min
0.17 – 0.22 30 min 765 max (78 max) 30 min
0.23 – 0.40 30 min 745 max (76 max) 30 min
0.41 – 0.70 833 max (85 max) 40 min 745 max (76 max) 40 min
0.71 – 1.60 800 max (82 max) 40 min 715 max (73 max) 40 min
1.61 – 8.00 785 max (80 max) 40 min 685 max (70 max) 40 min

Diameter Tolerances

Dia (mm) Tolerance (mm) Ovality (mm)
0.10.0.11 +/-0.003 0.003
0.12·0.16 +/-0.005 0.005
0.17 -0.28 +/-0.007 0.007
0.29 ·0.50 +/-0.008 0.008
0.51 .0.90 +/-0.013 0.013
0.91·1.60 +/-0.020 0.020
1.61-2.80 +/-0.030 0.030
2.81-6.00 +/-0.030 0.030
6.00 -8.00 +/-0.040 0.040
Packing specifications

On plastic spools as per OIN standards.

Wire (EPQ) for Kitchenware and Baskets

KEl’s has the ability to manufacture Stainless Steel Wires in bright as well as in matte finish, suitable for kitchenware and basket, grade AISI 304, in various sizes. KEI is a major market player for wires in Electropolish quality, Balls, Pins, Nails and other general application.

Wire (EPQ) for Kitchenware and Baskets

KEI’s Stainless Steel Wire for Scrubber application has very bright smooth finish and its extra softness enables further cold working by the customers.

Specification for Scrubber Application in Spool Packing

Diameter(mm) Type of Soool Unit Weight (Kg)
0.80 DIN355,DIN250 40- 45.18- 22
0.12 to 0.15 DIN 160,DIN 125 3-6,l.5 – 3
0.15 OIN200 8- 12

Mechanical Properties   

Diameter (mm) Grade Tensile Strength N/mm'(Kgl/mm) Finish Method
0.8 AISl:304 640-830 (65-85) Annealed
AISl:430
AISl:434		 490-640(50-65)
0.12 yo 0.15 AISl:304 Max 758 (Max 80) Annealed
0.12 yo 0.15 AISl:430
AISl:434 		Min 1170 (Min 120) Wet drawn

Mechanical Properties Along With Packing Details

Specification for 1/8, 1/4, 3/4 Hard Temper Wires

Temper Wire Dia Range Coil Dia Range (Inches) Coil Weight Surface Finish Total Wt. on former
1/8 hard, 120 KSI Max. MM ID OD Kg Kg
5.00-8.00 24-27 33-37 250-400 Bright/Matte 1500
4.50-6.00 18-22 25-30 100-150 Stearate Coated 1000
4.50-6.00 18-22 25-30 100-150 Matte (Clean) 1000
4.50-6.00 18-22 25-30 100-150 Bright 1000
2.00-4.50 18-22 25-30 100-1000 Stearate Coated 1000
2.00-4.50 18-22 25-30 100-1000 Matte (Clean) 1000
2.00-4.50 18-22 25-30 100-1000 Bright 1000
1.25-2.00 18-22 25-30 50-150 Stearate Coated 1000
1.25-2.00 18-22 25-30 50-150 Matte (Clean) 1000
1.25-2.00 18-22 25-30 50-150 Bright 1000
0.90-1.25 10-12 19-21 25-90 Stearate Coated 500
0.90-1.25 10-12 19-21 25-90 Matte (Clean) 500
1/4 hard, 128 KSI Max. 0.90-1.25 10-12 19-21 25-90 Bright 500
4.50-6.00 18-22 25-30 100-150 Stearate Coated 1000
4.50-6.00 18-22 25-30 100-150 Matte (Clean) 1000
4.50-6.00 18-22 25-30 100-150 Bright 1000
2.00-4.50 18-22 25-30 100-1000 Stearate Coated 1000
2.00-4.50 18-22 25-30 100-1000 Matte (Clean) 1000
2.00-4.50 18-22 25-30 100-1000 Bright 1000
1.25-2.00 18-22 25-30 50-150 Stearate Coated 1000
1.25-2.00 18-22 25-30 50-150 Matte (Clean) 1000
1.25-2.00 18-22 25-30 50-150 Bright 1000
0.90-1.25 10-12 19-21 25-90 Stearate Coated 500
0.90-1.25 10-12 19-21 25-90 Matte (Clean) 500
0.90-1.25 10-12 19-21 25-90 Bright 500

Note : Totel height of former & pallet together is 1524 mm Max.

Packing – Specification for Scrubber Application in Drum Packing

Size rangs(mm) Drum Dimensions Inches Weight of wire Kg
0.80 – 1.20 OD 23″ Core 10″ HT 33″ 200

Stainless Steel Wires for Wall Tie/Tying WireslRe-inforcement Bars

KEl’s Stainless Steel Wire find application in construction industry. KEI manufactures Stainless Steel Wires in grades of 302. 304. 316. 316Ti. in bright as well as annealed condition. suitable to manufacture wall tie. tying wire as well as re-inforcement bars for building and construction. The sizes offered are 0.9 mm to 8.0 mm.

Chemical Composition Table